Page 14 - edco

HUBS the heart of every wheel
edco has designed and built hubs for a number of leading brands for more than 30 years. Precision-machined in Switzerland and hand-assembled in The Netherlands, every road hub employs our patented Multisys freehub body for compatibility with Shimano/SRAM and Campagnolo cassettes. edco-designed bearings mean years of ultra-smooth riding; a 5-point sealing system ensures minimum resistance and maximum protection.
BEARINGS raising the standard
SuperG
rear OPTIMA
J-Bend (2:1)
Multisys w/Antibite
130mm QR − −
SuperG FD rear PROSPORT DB J-Bend (2 cross) Multisys w/Antibite 130mm or 12x135 TA or 6-bolt adapter & OPTIMA DB 135mm QR 12x142 TA axle kits
Aptera rear AEROSPORT Straight Pull (2:1) Multisys w/Antibite 130mm QR – – PROSPORT
12x135 TA or Apaxvia rear MOUNTAINSPORT Straight Pull (4 cross) Shimano/SRAM w/Antibite 135mm QR 12x142 TA or
12x148 TA
6-bolt adapter & XD Driver
SuperS Track SuperT Track Victory
rear TRACKSPORT Roches rear TRACKSPORT
rear SUPERSPORT
J-Bend (2 cross) J-Bend (2 cross) Sapim CX-Carbon
Threaded Track Flip/Flop Threaded Track
Multisys w/Antibite
120mm bolt-on − − 120mm bolt-on − −
130mm QR
−
model
SuperG SuperG FD
Aptera
Apaxvia
SuperS Track SuperT Track Victory
hub
front front
front
front
front front front
used in
OPTIMA PROSPORT DB
OPTIMA DB
AEROSPORT PROSPORT
MOUNTAINSPORT
TRACKSPORT Roches TRACKSPORT SUPERSPORT
spoke freehub type body
J-Bend (radial) − J-Bend (2 cross) −
Straight Pull (radial) −
Straight Pull (4 cross) −
J-Bend (radial) − J-Bend (radial) − Sapim CX-Carbon −
standard axle
100mm QR 100mm QR
100mm QR
100mm QR
100mm bolt-on 100mm bolt-on 100mm QR
axle options
−
12x100 TA
–
12x100 TA or 15x100 TA
− − −
option parts
−
6-bolt adapter & axle kits
–
6-bolt adapter
− − −
Most premium hubs on the market today use ordinary industrial bearings, also known as cartridge bearings. While they offer a balance between performance, life, and cost, they’re designed for a broad range of uses and applications. Bicycle hubs are different, though. Operating at relatively low speeds, they not only require a tight seal against water and dirt, but also must withstand both radial and axial loads. edco has developed its own bearing speci cation to provide each hub with years of trouble-free, high-performance use. Lubrication, ball and raceway tolerances, seal design: everything is considered and tested – both in the lab and in the real world – before we put them in any edco hub.
12